Apple TV Remote for Video Service ProvidersArris MP2000 URC2054Atlas URC1056A03Atlas URC1056B04Cervino Android TV RemoteChamp 2020BC2Champ URC2020B0Champion URC2025B1Champion URC2025B2Delta URC3068Eclypse URC2025B1-BBEclypse URC2025B2-BBExperienceKita Android TV RemoteLuxury Hospitality RemoteNeutron URC6810Nevo PortalNova HT URC67200Polaris URC1090Proton URC6800Pulse IR URC2069Pulse RF URC2068Royal URC2060B0Slate URC8200BBTBH300 Zigbee Energy Management ThermostatTBZ500 Z-Wave Battery Operated ThermostatTIDE Dial Smart ThermostatTitan URC2056ISXTiVo S5 URC7020TiVo S6Z Voice RemoteTransport URC3268
Español 한국어

Slate URC8200

Slate provides a simplified control solution intended for hospitality applications.

↓

Features

Simplified Modeless Control

All keys on this remote are dedicated to controlling your cable box except for the POWER, VOLUME, and MUTE keys.

Secured Battery Compartment

This remote features a secure battery compartment to prevent battery theft.

IR Learning

This remote includes IR learning, making it possible to learn IR functions for TV models that may not be supported in the IR code library.

Backlit Keypad

This remote control features a backlit keypad, making it easier to read and use the remote while in a dark setting.

Fully Cleanable

Slate is designed to be cleaned with surface cleaners like sprays and wipes, creating a product that is free from germs for user peace of mind.

Setup

Remote Control Setup

CodeFinder and Setup Instructions

Step 1: CodeFinder

Step 2: Setup Instructions

TV-Image

Turn on your TV and follow the steps below to set up your remote.

Be sure to point the remote at your TV during setup.

Step 1:

Press and hold SETUP until the LED blinks twice.

Step 2:

Press the TV POWER key.

Step 3:

Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page.

Step 4:

Test the remote to confirm that it controls your TV as expected. If it does not, try again using the next code listed.

TV-Image

Turn on your TV and follow the steps below to set up your remote.

Be sure to point the remote at your TV during setup.

Step 1:

Press and hold SETUP until the LED blinks twice.

Step 2:

Press the TV POWER key twice.

Step 3:

Find your TV brand in the charts below. Press and hold the corresponding digit key while aiming the remote at your TV.

Step 4:

Release the key when the TV turns off and setup is complete.

TV-Image

Slate defaults the volume controls to the TV.

To change volume lock settings, perform the steps below.

Step 1:

Press and hold SETUP until the LED blinks twice.

Step 2:

Press the TV POWER key twice.

Step 3:

Press VOL+ to lock volume controls to the TV. Press MUTE to lock volume controls to the cable box.

To learn functions from another remote, do the following.

Step 1:

Press and hold SETUP until the LED blinks twice.

Step 2:

Enter 9 – 7 – 5. The LED will blink twice.

Step 3:

Press the key to be learned on the Slate remote. The LED will begin flashing rapidly.

Step 4:

Hold the original remote and slate remotes nose-to-nose while pressing and holding down the key to be learned from the original remote. The LED on Slate will blink twice to confirm a key has been learned.

Step 5:

Repeat steps 3-4 for as many keys as needed.

Step 6:

Press and hold SETUP until the LED blinks twice to exit learning mode.

For programming a macro, do the following steps.

Step 1:

Press and hold SETUP until the LED blinks twice.

Step 2:

Enter 9 – 9 – 5. The LED will blink twice.

Step 3:

Press the key that is to store the macro.

Step 4:

Type out the macro sequence.

Step 5:

Press and hold SETUP until the LED blinks twice to confirm the macros has been saved.

Functions

Remote Functions

Key Functions

  • SETUP(unlabeled) used for remote control programming
  • TV POWER turns your TV on and off
  • CBL POWER(unlabeled) turns your cable box on and off
  • FF/PAUSE/PLAY/REW/STOP used to control playback On Demand programs
  • VOD used to access on demand program library
  • PAGE +/- cycles guide one page at a time
  • GUIDE displays program guide
  • MENU displays main cable menu
  • INFO displays information on current selected program
  • EXIT closes current menu
  • A-D KEYS used for special functions displayed on your cable menus
  • LAST returns to the previously selected channel

FAQ

Frequently Asked Questions

This remote uses AA size batteries.

While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life.

Five blinks means that your batteries are low and need to be replaced soon.

To control your equipment, be sure to do the following:

  • Point the remote at the equipment when using it, making sure that there is a clear line of sight.
  • The LED on the remote should blink with each keypress. If not, replace the batteries.
  • The remote needs to be programmed in order to control your equipment.
  • Follow the instructions in the setup section of this site to program the remote.