Apple TV Remote for Video Service ProvidersArris MP2000 URC2054Atlas URC1056A03Atlas URC1056B04Cervino Android TV RemoteChamp 2020BC2Champ URC2020B0Champion URC2025B1Champion URC2025B2Delta URC3068Eclypse URC2025B1-BBEclypse URC2025B2-BBExperienceKita Android TV RemoteNeutron URC6810Nevo PortalNova HT URC67200Proton URC6800Pulse IR URC2069Pulse RF URC2068Royal URC2060B0Slate URC8200Slate URC8200BBTBH300 Zigbee Energy Management ThermostatTBZ500 Z-Wave Battery Operated ThermostatTIDE Dial Smart ThermostatTitan URC2056ISXTiVo S5 URC7020TiVo S6Z Voice RemoteTransport URC3268
Español 한국어

Polaris URC1090

Polaris offers simplified control with less clutter and easy-to-read oversized keys.

↓

Features

Simplified Modeless Control

All keys on the remote are dedicated to controlling your cable box except for the TV POWER, VOLUME, and MUTE, and INPUT keys.

Large Keys/Text for Easy Reading

This remote features over-sized keys and larger text to make the keys easy to quickly identify, even with tired eyes.

Backlit Keypad

This remote control features a backlit keypad, making it easier to read and use the remote while in a dark setting.

Setup

Remote Control Setup

CodeFinder and Setup Instructions

Step 1: CodeFinder

Step 2: Setup Instructions

TV-Image

Turn on your TV and follow the steps below to set up your remote.

Be sure to point the remote at your TV during setup.

Step 1:

Press the TV POWER key.

Step 2:

Press and hold SETUP until the LED blinks twice.

Step 3:

Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page.

Step 4:

Test the remote to confirm that it controls your TV as expected. If it does not, try again using the next code listed.

TV-Image

Turn on the TV and follow the steps below to search through all codes.

Be sure to point the remote at your TV during setup.

Step 1:

Press the TV POWER key.

Step 2:

Press and hold SETUP until the LED blinks twice.

Step 3:

Enter 9 – 9 – 1 using the digit keys on the remote.

Step 4:

Aim the remote at your TV and press CH+ repeatedly until the TV turns off.

Step 5:

Press and hold SETUP until the LED blinks twice. Your new setting is saved.

Functions

Remote Functions

POWER SETUP KEYS

  • TV POWER turns your TV on and off
  • CBL POWER turns your cable box on and off
  • SETUP used for remote control programming PLAYBACK CONTROLS
  • FF/PAUSE/PLAY/REW/STOP used to control playback of live, recorded, or On Demand programs
  • RECORD press to record selected program
  • LIST displays the list of DVR recorded programs

NAVIGATION KEYS

  • GUIDE displays program guide
  • MENU displays main cable menu
  • INFO displays information on current selected program
  • EXIT closes current menu
  • FAV cycles through favorite channels set on your cable box
  • A-C KEYS used for special functions displayed on your cable menus
  • ON DEMAND used to access on demand program library
  • LAST returns to the previously selected channel

FAQ

Frequently Asked Questions

This remote uses AA size batteries.

While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life.

Five blinks means that your batteries are low and need to be replaced soon.

To control your equipment, be sure to do the following:

  • Point the remote at the equipment when using it, making sure that there is a clear line of sight.
  • The LED on the remote should blink with each keypress. If not, replace the batteries.
  • The remote needs to be programmed in order to control your equipment.
  • Follow the instructions in the setup section of this site to program the remote.

To turn on the remote backlight, press the light green BACKLIGHT key that is between the two power keys.