Apple TV Remote for Video Service ProvidersAtlas URC1056A03Atlas URC1056B04Cervino Android TV RemoteChamp 2020BC2Champ URC2020B0Champion URC2025B1Champion URC2025B2Delta URC3068Eclypse URC2025B1-BBEclypse URC2025B2-BBExperienceKita Android TV RemoteNeutron URC6810Nevo PortalNova HT URC67200Polaris URC1090Proton URC6800Pulse IR URC2069Pulse RF URC2068Royal URC2060B0Slate URC8200Slate URC8200BBTBH300 Zigbee Energy Management ThermostatTBZ500 Z-Wave Battery Operated ThermostatTIDE Dial Smart ThermostatTitan URC2056ISXTiVo S5 URC7020TiVo S6Z Voice RemoteTransport URC3268
Español 한국어

Arris MP2000 URC2054

Designed in conjunction with Arris, the MP2000 remote is the perfect complement for the Arris Gateway/Media Player cable system.

↓

Features

Simplified Modeless Control

All keys on the remote are dedicated to controlling your cable box except for the TV POWER, VOLUME, and MUTE, and INPUT keys.

Volume Lock

This feature allows you to lock the volume and mute functions to your TV or Audio Device.

Backlit Keypad

This remote control features a backlit keypad, making it easier to read and use the remote while in a dark setting.

Setup

Remote Control Setup

CodeFinder and Setup Instructions

Step 1: CodeFinder

Step 2: Setup Instructions

TV-Image

Turn on your equipment and follow the steps below to set up your remote.

Be sure to point the remote at your equipment during setup.

Step 1:

Press and hold MENU and OK keys until the POWER key blinks twice

Step 2:

Using the digit keys on the remote, enter the code shown in the CodeFinder on this web page.

Step 3:

Test the remote to confirm that it controls your device as expected. If it does not, try again using the next code listed.

TV-Image

Turn on the TV or Audio Device you wish to control and follow the steps below.

Be sure to point the remote at your equipment during setup.

Step 1:

Press and hold MENU and OK keys until the POWER key blinks twice

Step 2:

Enter 9-9-1 using the digit keys on the remote.

Step 3:

To search for a TV code, press 1. To search an audio code, press 3.

Step 4:

Aim the remote at your equipment and press the NAV UP key repeatedly until the device turns off.

Step 5:

Press the OK key to save the working code. The POWER key will flash twice.

Volume controls on the remote default to control the TV unless the remote is programmed for an audio device.

To manually set the volume controls, follow the steps below.

Step 1:

Press and hold MENU and OK keys until the POWER key blinks twice

Step 2:

Enter 9-9-3 using the digit keys on the remote.

Step 3:

Press the 1 key to assign volume controls to the TV. Press the 3 key to assign volume controls to the audio device.

Functions

Remote Functions

POWER/INPUT KEYS

  • POWER turns equipment used for watching cable TV on and off
  • SETUP used for remote control programming

NAVIGATION KEYS

  • A-D KEYS used for special functions displayed on your cable menus
  • INFO displays information on current selected program
  • ZOOM zooms in on selected content
  • BACK displays the previous menu screen
  • MENU displays main cable menu
  • NEXT cycles to the next screen
  • LAST returns to the previously selected channel
  • FAV cycles through favorite channels set on your cable box

PLAYBACK CONTROLS

  • FF/PAUSE/PLAY/REW/SKIP BACK/SKIP FWD/STOP/ used to control playback of live, recorded, or On Demand programs
  • RECORD press to record selected program

OTHER KEYS

  • LAST returns to the previously selected channel
  • CLEAR clears or deletes the current selection

FAQ

Frequently Asked Questions

This remote comes with VOLUME LOCK defaulted to control volume using your TV.  To change VOLUME LOCK to another device, follow the VOLUME LOCK programming instructions in the SETUP section of this site.

This remote uses AA size batteries.

While Heavy Duty batteries will work, alkaline batteries are recommended and will have much longer battery life.

Five blinks means that your batteries are low and need to be replaced soon.

To control your equipment, be sure to do the following:

  • Point the remote at the equipment when using it, making sure that there is a clear line of sight.
  • The LED on the remote should blink with each keypress. If not, replace the batteries.
  • The remote needs to be programmed in order to control your equipment.
  • Follow the instructions in the setup section of this site to program the remote.