OFA Evolve 4 URC7145

Only if it is a picked function, not if you have programmed a real-time macro on it.

The NETTV key is for viewing digital TV, streamed over the internet. If your original remote control already had a key for this, for example, many newer TVs have a Netflix key, then this key will perform the same as the key on your original remote. However, if you did not have a key like this, but still had the ability to watch a streaming service, you can use this key as a shortcut by programming a macro on it. Most AV devices which are connected to the internet, such as Smart TVs or streaming Set Top Boxes have one or more applications they can run to access TV viewing via the internet. Examples of these would be Netflix, YouTube, Amazon Prime, BBC iPlayer or similar.

A real time macro records the same amount of seconds a menu on your original device takes to come up. For example, if the menu on your TV takes 3 seconds to come up, the One for All Remote will retain this information. A regular macro sends out multiple functions to the selected devices, but it does not record real time. You can only program a real time macro on the NETTV key. You can program a regular macro on the other keys.

On the Evolve, the STB key should be used for programming the Freeview.

On the Evolve remote, you can use the BLU or AUD key for your DVD-Home Cinema. After programming the set-up code, please test the volume keys. Also please check if the 1-0 keys change the inputs and if play and stop work correctly with the DVD-Home Cinema.

The Vodafone Giga Box 4K is a Set-Top-Box which is based on the Bluetooth technology. However, all our One For All remote controls are based on the Infrared technology. This means, that our One For All remotes won’t be able to control your Vodafone Giga Box 4K. To read more about the differences between the Bluetooth and Infrared technology, please click on the following link: What is the difference between Bluetooth (BT), Radio Frequency (RF) and Infrared (IR) remote controls? There is still a possibility to control the Vodafone Giga Box with the One For All remote control. Please enable the CEC mode on your TV. The CEC function allows you to control the Vodafone Giga Box in the TV mode.

The Amazon Fire TV is a streaming stick which is based on the Bluetooth technology. One For All remotes are not compatible with Bluetooth. There is still a possibility to control the Amazon Fire TV with the One For All remote control. Please enable the CEC mode on your TV. The CEC function allows you to control the Amazon Fire Stick in the TV mode.

If you would like to delete a learned function that you no longer require, please follow the procedure outlined below:

• Hold down MAGIC until the light blinks once and then twice and stays on
• Enter the code 976, the light will blink twice
• Press the MODE key to select the relevant device key
• Press the learned key twice, the device key will blink twice
• If there is another key to be deleted, please repeat steps 1 to 4.
• The key that has been cleared will now perform the default function.

Additional Information:
You can delete a learned key by overwriting it with a new learned function. If a learned function used in a macro is subsequently deleted, the macro will revert to sending the keys original function. If you would like to reset all learned keys in one device mode, after step 3 hold the Magic key until the light blinks twice

Before resetting the Evolve, please take the following into account:

• If you have ever sent in your remote control to our Upgrade Service for an update, these codes will be erased as well. In that case, it is highly advised not to perform a factory reset.

To reset your remote to the manufacturer's setting, please follow the procedure outlined below:

• Remove a battery from the remote and press a button with it removed.
• Reinsert the battery – the LED should blink twice.
• Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice and stays on.
• Enter the code 9 8 1, the LED will blink 4 times.
• The remote is now reset to its factory defaults.
• You can now setup your remote again.

N.B. The procedure must be performed within 6 seconds of applying power to the remote, that is, inserting batteries. After 6 seconds of Power it will not activate.

If you would like to reset a device mode, please use the following procedure:

• Hold down the MAGIC key, the light will blink twice.
• Enter the code 992.
• Select the device you wish to reset using the MODE key.
• Press MAGIC key twice, the light will blink twice to confirm.
• The device key has now been deactivated.

Additional Information:
Mode reassignment erases all Key Moved and learned keys for that mode.

Yes, it is possible, as long as the remote supports 2 or more devices. Another device mode will have to be changed into the required device mode. To do this please use the procedure below:

• Hold down Magic until the LED stays on.
• Enter the code 992, the light will blink twice.
• Using MODE, select the Source Device key.
• Press MAGIC once.
• Using the MODE key, select the device key that will be changed.
• Press MAGIC once, the light will blink twice.

It is possible to lock the volume on your Essence remote to a single device key (for example: the volume control could be linked only to a TV). This means that when the remote is in DVD or SAT mode and the volume keys are pressed, the TV volume will still be activated.

If you would like to have the volume locked to a particular device, please follow the procedure outlined below:

• Hold down MAGIC until the LED stays on.
• Enter code 993, the light blinks twice.
• Press the relevant device you wish to assign volume control to
• Press MAGIC once, the light will blink twice.

To move a particular key within the same device mode:

• Press and hold the MAGIC key until the LED stays on.
• Enter code 994, the light will blink twice.
• Using MODE to select the relevant device.
• Press the key to move once.
• Press the key to overwrite once, the light will blink twice.

To move a particular key from one device mode to another:

• Press and hold the MAGIC until the LED stays on.
• Enter code 994, the light will blink twice.
• Using MODE to select the relevant device.
• Press the key to move once
• Using MODE select the relevant device where the key will be moved.
• Press the key to overwrite once, the light will blink twice.

There could be a number of reasons for this.  Check the following:

• Make sure the original remote that came with the device is in working order, by testing it on your device. If it is not responding, it might not be working correctly. 
• Make sure you are not performing the learning procedure under bright lighting or in bright sunlight as this can interfere. 
• Ensure that the two remotes are approximately 2 to 3 cm apart, and that the transmitting end of the original remote is facing the remote.
• Sometimes holding the key on the original remote down for slightly longer may help, and conversely sometimes quickly pressing and releasing the key on the original works better.
• The batteries used should have sufficient power. Even though the remote works when using it to switch on and off devices, it might not have enough power to be able to learn additional functions. Please replace a new set of batteries
• It is also possible that the memory on your remote control has reached the maximum capacity due to too many learned or other customized functions. Please remove some existing learned keys.
• Some manufacturer’s remotes use a different signal, or infra-red protocol, that the One For All remote cannot reproduce. These are commonly signals that use a higher frequency. Radio frequency remotes cannot be learned from, because these signals are not infra-red based.

Please check the following web page which will lead you to support in your area: https://www.oneforall.com/support/universal-remotes